Stacking Drawer Die from Eileen Hull Designs by Sizzix

 Here's another fun and versatile die, Stacking Drawers, from the recent Sizzix vault release. 

 The drawers fit nicely inside the Treasure Box, also part of this vault release, or they can be stand alone as I crafted below.

This is easy to make!  Follow along with me.

Step 1:  For each drawer cut these parts:

Step 2:  Build the box by placing red liner tape or adhesive of your choice  on the tabs. 

Step3:  Attach the two sides forming a rectangle.

Step 4:  Fold the tabs down and attach the bottom of the drawer.

The finished drawer should look like this:

Step 5:  The drawer slips into a band which is made from the other long die-cut piece.

Step 6:  Fold the end pieces over each other forming a band.  Clothes pins work great to hold it together while the glue sets up. Make sure the band fits around your assembled drawer!

Assembled drawer slides into the band.

Step 7:  Add adhesive to the top of the drawer so that you can adhere another drawer on top.

Step 8:  Adhere 3 drawers together then cut a piece of lightweight chipboard 2 1/8" x 5 1/4" and cover with design paper.

Step 9: Adhere the panels from Step 8 to the sides of the stacked drawers.

You should end up with a lovely drawer stack like this!  You could make the drawer stack taller or shorter, its up to you!

View from the rear; you could also put a panel on the back side.

These little drawers make great little presents or favors.  There's another tutorial for these here.

Another set of  Stacked Drawers.

Eileen Hull Designs by Sizzix Dies

663633 ScoreBoards XL Die - Stacking Drawer Box

Thanks for joining me today!

xoxo Maggi